Engineering, 17.06.2020 21:57 Justinoreilly71
Air at 27°C and a velocity of 5 m/s passes over the small region As (20 mm × 20 mm) on a large surface, which is maintained at Ts= 127°C. For these conditions, 0.5 W is removed from the surface As. To increase the heat removal rate, a stainless steel (AISI 304) pin fin of diameter 4 mm is affixed to As, which is assumed to remain at Ts= 127°C.
Required:
a. Determine the maximum possible heat removal rate through the fin.
b. What fin length would provide a close approximation to the heat rate found in part a?
c. Determine the fin effectiveness.
d. What is the percentage increase in the heat rate from As due to installation of the fin
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 08:10
Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed
Answers: 1
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Engineering, 04.07.2019 18:20
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
You know the right answer?
Air at 27°C and a velocity of 5 m/s passes over the small region As (20 mm × 20 mm) on a large sur...
Questions
History, 12.09.2019 22:20
