subject
Engineering, 18.06.2020 03:57 sarah8479

Assume the wastewater, (Flow = 100 L/min, Cin = 100 mg/L, and k = 0.4 per minute) is to be treated by three equal-volume CSTRs in series. Calculate the total volume of those CSTRs (keep in mind that each of the three is identical) to achieve the desired effluent concentration of 5 mg/L.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 04.07.2019 18:10
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
question
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
You know the right answer?
Assume the wastewater, (Flow = 100 L/min, Cin = 100 mg/L, and k = 0.4 per minute) is to be treated b...
Questions
question
Mathematics, 07.05.2021 18:30
question
History, 07.05.2021 18:30
question
History, 07.05.2021 18:30
question
Mathematics, 07.05.2021 18:30
question
Mathematics, 07.05.2021 18:30
Questions on the website: 13722361