Engineering, 19.06.2020 11:57 janeou17xn

A power plant operates on a regenerative vapor power cycle with one open feedwater heater. Steam enters the first turbine stage at 12 \mathrm{MPa}, 560^{\circ} \mathrm{C}12MPa,560 ∘ C and expands to 1 MPa, where some of the steam is extracted and diverted to the open feedwater heater operating at 1 MPa. The remaining steam expands through the second turbine stage to the condenser pressure of 6 kPa. Saturated liquid exits the open feedwater heater at 1 MPa. The net power output for the cycle is 330 MW. For isentropic processes in the turbines and pumps, determine:
a. the cycle thermal efficiency.
b. the mass flow rate into the first turbine stage, in kg/s.
c. the rate of entropy production in the open feedwater heater, in kW/K.

Answers: 1

Show answers

Answers

Answer from: keananashville

a. 46.15%

b. 261.73 kg/s

c. 54.79 kW/K

Explanation:

a. State 1

The parameters given are;

T₁ = 560°C

P₁ = 12 MPa = 120 bar

Therefore;

h₁ = 3507.41 kJ/kg, s₁ = 6.6864 kJ/(kg·K)

State 2

p₂ = 1 MPa = 10 bar

s₂ = s₁ = 6.6864 kJ/(kg·K)

h₂ = (6.6864 - 6.6426)÷(6.6955 - 6.6426)×(2828.27 - 2803.52) + 2803.52

= (0.0438 ÷ 0.0529) × 24.75 = 2824.01 kJ/kg

State 3

p₃ = 6 kPa = 0.06 bar

s₃ = s₁ = 6.6864 kJ/(kg·K)

sg = 8.3291 kJ/(kg·K)

sf = 0.52087 kJ/(kg·K)

x = s₃/sfg = (6.6864- 0.52087)/(8.3291 - 0.52087) = 0.7896

(h₃ - 151.494)/2415.17 = 0.7896

∴ h₃ = 2058.56 kJ/kg

State 4

Saturated liquid state

p₄ = 0.06 bar= 6000 Pa, h₄ = 151.494 kJ/kg, s₄ = 0.52087 kJ/(kg·K)

State 5

Open feed-water heater

p₅ = p₂ = 1 MPa = 10 bar = 1000000 Pa

s₄ = s₅ = 0.52087 kJ/(kg·K)

h₅ = h₄ + work done by the pump on the saturated liquid

∴ h₅ = h₄ + v₄ × (p₅ - p₄)

h₅ = 151.494 + 0.00100645 × (1000000 - 6000)/1000 = 152.4944113 kJ/kg

Step 6

Saturated liquid state

p₆ = 1 MPa = 10 bar

h₆ = 762.683 kJ/kg

s₆ = 2.1384 kJ/(kg·K)

v₆ = 0.00112723 m³/kg

Step 7

p₇ = p₁ = 12 MPa = 120 bar

s₇ = s₆ = 2.1384 kJ/(kg·K)

h₇ = h₆ + v₆ × (p₇ - p₆)

h₇ = 762.683 + 0.00112723 * (12 - 1) * 1000 = 775.08253 kJ/kg

The fraction of flow extracted at the second stage, y, is given as follows

$y = \dfrac{762.683 - 152.4944113 }{2824.01 - 152.4944113 } = 0.2284$

The turbine control volume is given as follows;

$\dfrac{\dot{W_t}}{\dot{m_{1}}} = \left (h_{1} - h_{2} \right ) + \left (1 - y \right )\left (h_{2} - h_{3} \right )$

= (3507.41 - 2824.01) + (1 - 0.22840)*(2824.01 - 2058.56) = 1274.02122 kJ/kg

For the pumps, we have;

$\dfrac{\dot{W_p}}{\dot{m_{1}}} = \left (h_{7} - h_{6} \right ) + \left (1 - y \right )\left (h_{5} - h_{4} \right )$

= (775.08253 - 762.683) + (1 - 0.22840)*(152.4944113 - 151.494)

= 13.17 kJ/kg

For the working fluid that flows through the steam generator, we have;

$\dfrac{\dot{Q_{in}}}{\dot{m_{1}}} = \left (h_{1} - h_{7} \right )$

= 3507.41 - 775.08253 = 2732.32747 kJ/kg

The thermal efficiency, η, is given as follows;

$\eta = \dfrac{\dfrac{\dot{W_t}}{\dot{m_{1}}} -\dfrac{\dot{W_p}}{\dot{m_{1}}}}{\dfrac{\dot{Q_{in}}}{\dot{m_{1}}}}$

η = (1274.02122 - 13.17)/2732.32747 = 0.4615 which is 46.15%

(762.683 - 152.4944113)/(2824.01 - 152.4944113)

b. The mass flow rate, $\dot{m_{1}}$ , into the first turbine stage is given as follows;

$\dot{m_{1}} = \dfrac{\dot{W_{cycle}}}{\dfrac{\dot{W_t}}{\dot{m_{1}}} -\dfrac{\dot{W_p}}{\dot{m_{1}}}}$

$\dot{m_{1}}$ = 330 *1000/(1274.02122 - 13.17) = 261.73 kg/s

c. From the entropy rate balance of the steady state form, we have;

$\dot{\sigma }_{cv} = \sum_{e}^{}\dot{m}_{e}s_{e} - \sum_{i}^{}\dot{m}_{i}s_{i} = \dot{m}_{6}s_{6} - \dot{m}_{2}s_{2} - \dot{m}_{5}s_{5}$

$\dot{\sigma }_{cv} = \dot{m}_{6} \left [s_{6} - ys_{2} - (1 - y)s_{5} \right ]$

= 261.73 * (2.1384 - 0.2284*6.6864 - (1 - 0.2284)*0.52087 = 54.79 kW/K

Answer from: Quest

Mri is one what are your options anyway ?

Answer from: Quest

answer:

d. attempt to find the owner, then leave your information if you cannot find them.

explanation:

d. represents both (b) and (c).

more logical as well.

b and c are to complicated.

glad i could , give me a follow, so if you need with any other question, im here.

Another question on Engineering

Engineering, 04.07.2019 18:10

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Have a greater impact on maintenance productivity than any other support group. (clo5) a)-the top management b)-inventory and purchasing c)-sub-contracting d)-cmms

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

Answer

You know the right answer?

A power plant operates on a regenerative vapor power cycle with one open feedwater heater. Steam ent...

Questions