The current I in a length
of aluminum of cross-sectional area A
is given by the
<...
Engineering, 21.06.2020 01:57 chelly70
The current I in a length
of aluminum of cross-sectional area A
is given by the
formula I = nevA
Show that the units on the left hand
side of the equation are consistent
with those on the right hand side.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
Engineering, 04.07.2019 18:20
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
Mathematics, 05.03.2021 19:40
Mathematics, 05.03.2021 19:40
Mathematics, 05.03.2021 19:40
Mathematics, 05.03.2021 19:40
Mathematics, 05.03.2021 19:40
Mathematics, 05.03.2021 19:40
History, 05.03.2021 19:40
English, 05.03.2021 19:40
Mathematics, 05.03.2021 19:40
Mathematics, 05.03.2021 19:40