Engineering, 30.06.2020 18:01 sksksjs

The Apparent Molecular Weight of Air Experiment 1: Study the Relationship Between Volume and Temperature for a Sample of Air Lab Results Record the data you collected for volume and temperature in the table below. Volume of Air in the Syringe (mL) Total Volume of Air (mL) Temperature (ºC) 75 225.0 21.5 58.6 208.6 0 89.1 239.1 40 104.4 254.4 60 119.7 269.7 80 135.0 285.0 Create and a graph of total volume of air (y-axis) versus the temperature (x-axis). What is the relationship between volume and temperature? The volume increases as the temperature increases. Experiment 2: Study the Relationship Between Volume and Pressure for a Sample of Air Lab Results Record the data you collected for volume and temperature in the table below. Volume of Air (mL) Pressure (atm) 1/Pressure (atm–1) Data Analysis Create and save a graph of total 1/pressure (y-axis) versus volume of air (x-axis).
Experiment 3: Measure the Mass of Air Lab Results Record the data you collected for mass and pressure in the table below. Mass of Flask and Air (g) Pressure (atm) Data Analysis Calculate and record the following data in the table below. To calculate the number of moles and molar mass use the equations derived from the ideal gas law. Mass of Air (g) Number of Moles of Air Molar Mass of Air (g/mol)
Conclusions The molar masses discussed here are for dry air, but air often has some water vapor mixed in with it. Would you expect the apparent molar mass of wet air to be less or more than of dry air? Explain. Below is a graph of the mass of air as a function of the pressure. How does the data appear to be related? The relattion is consitenet when the mass increse the prusser increse.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis

Answers: 1

Answer

Engineering, 04.07.2019 19:20

At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2

Answers: 2

Answer

You know the right answer?

The Apparent Molecular Weight of Air Experiment 1: Study the Relationship Between Volume and Tempera...

Questions