Engineering, 30.06.2020 18:01 zahriaarana

Data Table 1: Resistors in Series Battery Voltage R1 R2 R3 Rea 1.60 V Calculated Resistance (12) 100 1000 2200 3300 5% 5% 5% 5% Tolerance from Color Code (92) DMM Resistance (12) 100.222 105002 2.1422 1152.3422 DMM Current (mA) 0.12mA 0.12mA 0.12mA 0.36mA DMM Voltage (V) 0.12V 1.20V 0.26V 1.58V Calculated Voltage (V) 12.02 x 10^-3V 1.2V 0.0002568V 1.2123V Calculated Current (mA) 0.00037mA 0.00037mA 0.00037mA 0.00037mA Data Table 2: Resistors in Parallel Battery Voltage 1.60 R1 R3 Rea Calculated Resistance (12) 100 1000 2200 3300 DMM Resistance (12) 00.822 00.812 00.802 2.412 DMM Voltage (V) 1.6V 1.6V 1.6V 4.8V DMM Current (mA) -0.72mA -0.15mA -1.6mA -2.5mA Calculated Voltage (V) 1.53V 1.5V -1.92V 0.485V Calculated Current (mA) 15.2mA 1.5mA -0.873mA 1.6mA Data Table 3: Resistors in Combination Battery Voltage Ri R2 R23 Rea 1.60 100 1000 2200 1790 3300 Calculated Resistance (12) DMM Resistance (12) 100.222 105022 2.1422 2.1422 1152.3412 DMM Voltage (V) 0.54V 1.02V 0.0034V 1.02V 2.6V DMM Current (mA) 1.6mA 1.6mA 0.10mA 0.09mA 3.31mA Calculated Voltage (V) 0.049V 0.49V 1.1V 0.34V 1.6V Calculated Current (mA) 0.49mA 0.49mA 0.49mA 0.25mA 1.5mA How do the magnitudes of the currents through the full circuits compare for Parts I-III of this exercise, in which resistors are combined in series, in parallel, and in combination? Use the data recorded in Data Tables 1-3 to answer this question.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 16:10

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

Answer

You know the right answer?

Data Table 1: Resistors in Series Battery Voltage R1 R2 R3 Rea 1.60 V Calculated Resistance (12) 100...

Questions