Engineering, 03.07.2020 08:01 ttwright24
. We would like to bolt the cantilevered beam to the column using a bolt pattern with two bolts. We are considering two possibilities: The bolts will be arranged in-line vertically, 5 inches apart, centered in the 6x6 in box, or, the bolts will be arranged in-line horizontally, 5 inches apart, centered in the 6x6 in box. Determine if one of the arrangements is preferable. Prove your point. You can do this by calculating the worst shear stre
Answers: 2
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
Engineering, 04.07.2019 18:10
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
. We would like to bolt the cantilevered beam to the column using a bolt pattern with two bolts. We...
Computers and Technology, 20.08.2019 20:30
Computers and Technology, 20.08.2019 20:30
Physics, 20.08.2019 20:30
Computers and Technology, 20.08.2019 20:30
Computers and Technology, 20.08.2019 20:30
Computers and Technology, 20.08.2019 20:30
Computers and Technology, 20.08.2019 20:30
Computers and Technology, 20.08.2019 20:30