Engineering, 03.07.2020 19:01 nisslove

explain techniques you can use while driving any vehicle to increase fuel efficiency and reduce emissions.

Answers: 2

Show answers

Answers

In order to increase fuel efficiency and reduce emissions the following vehicle driving and operation technique are effective

1) Ensure vehicle tires are properly inflated

2) Remember to keep the nozzle in the tank before the fuel start to flow and also drain any remaining fuel left in the hose into the tank after the fuel pump stops before removing the fuel nozzle from the tank

3) Ensure battery cables are not corroded so as to enable the alternator to work more efficiently

4) Avoid idling the vehicle as it consumes an appreciable amount of fuel

5) Have the engine checked regularly

6) When driving endeavor to select the highest possible gear

7) Avoid suddenly applying breaks by anticipating the flow of traffic and allowing adequate distance between vehicles when driving to improve safety and reduce the likelihood of delay, with more time on the road driving due to incidents

8) Avoid increasing the engine running speed while the clutch is disengaged

9) Avoid putting extra load on the engine such as air conditioning and extra load in the vehicle from items left in the vehicle on previous journeys

10) Plan multiple assignment into one journey to save time and fuel

11) Strive to drive only on well paved roads to increase engine efficiency

12) Use the engine oil recommended by the vehicle manufacturer

13) Ensure chassis and suspensions are not misaligned

14) Use the manufacturer recommended octane for your vehicle

Explanation:

Increasing fuel efficiency and reducing emissions will reduce fuel cost and protect the environment

Regular vehicle maintenance can reduce 30% of extra fuel cost

Applying the above driving techniques which are part of the Eco-driving golden rules provides a perceptive way of reaching a destination safely and on time.

Answer from: Quest

the correct answer is c.stops after infancy and childhood.

myelin is the substance of the central nervous system (cns) that insulates nerve cell axons to increase the speed at which nerve impulse travels. myelination is a process of myelin formation. this process occurs postnatally, begins in the embryo during the midst of early development and finishes after birth.

Answer from: Quest

b. check your rearview mirror

explanation:

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 03.07.2019 15:10

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

Answer

You know the right answer?

explain techniques you can use while driving any vehicle to increase fuel efficiency and reduce emis...

Questions