subject
Engineering, 04.07.2020 14:01 jazz71527152

A well-insulated heat exchanger is to heat water (cp 5 4.18 kJ/kg?8C) from 25 to 608C at a rate of 0.50 kg/s. The heating is to be accomplished by geothermal water (cp 5 4.31 kJ/kg?8C) available at 1408C at a mass flow rate of 0.75 kg/s. Determine (a) the rate of heat transfer and (b) the rate of entropy generation in the heat exchanger.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
You know the right answer?
A well-insulated heat exchanger is to heat water (cp 5 4.18 kJ/kg?8C) from 25 to 608C at a rate of 0...
Questions
question
Chemistry, 07.07.2019 16:00
question
Mathematics, 07.07.2019 16:00
question
Mathematics, 07.07.2019 16:00
question
Mathematics, 07.07.2019 16:00
Questions on the website: 13722367