Engineering, 09.07.2020 07:01 bevanscory123

Explain the operation of the alarm system and strobe lighting system: By determining the resistance of the resistor in the alarm circuit and explain the
functionality of the resistor in the circuit;
(ii) By providing all circuit theory explanations and calculations to show that the voltage in
the alarm system can be reduced to 5V since the system needs to operate with a current
between 0.4mA to 0.6mA;
(iii) By providing all charge theory explanations and calculations to show the current flowing
in the strobe lighting system.
Without calculating the values oynlain how the current

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

Answer

You know the right answer?

Explain the operation of the alarm system and strobe lighting system: By determining the resistance...

Questions