subject
Engineering, 15.07.2020 01:01 heysorryguys

Draw the and translate
chart beginn
The room
The following data apply to an A/C unit. Room sensible heat and latent heat are
11.6kW and 11.6 kW respectively, inside condition is 25°C DBT, 50% RH. Outside
design condition is 35 °C DBT and 27.8 °C, return air from the room is mixed with
outside air in the ratio of 4:1 before entering the cooler coil. Return air from the room
is mixed with the air leaving the coil in the ratio of 1:4. cooling coil bypass factor 0.1,
the air may reheated if necessary before supply to the room. Coil temperature is 10
°C. find a-supply air condition b- refrigeration load due to reheat c- total refrigeration
load capacity d- the quantity of fresh air supplied.
RSH. There
M2. sincet
we should
till this lir
intersectior
supply con
S
O MTW Mall
25°C, 50%
Qs=11.6
QI=11.6
R
R
R

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
question
Engineering, 04.07.2019 18:20
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
question
Engineering, 04.07.2019 19:10
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
question
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
You know the right answer?
Draw the and translate
chart beginn
The room
The following data apply to an A/C unit...
Questions
question
Mathematics, 21.04.2021 19:50
question
Chemistry, 21.04.2021 19:50
question
Mathematics, 21.04.2021 19:50
Questions on the website: 13722361