Engineering, 15.07.2020 02:01 Tatertotzzzz
In a production turning operation, an engineer wants a single pass must be completed on the cylindrical workpiece in 5.0 min. The piece is 400 mm long and 150 mm in diameter. Using a feed = 0.30 mm/rev and a depth of cut = 4.0 mm, what cutting speed must be used to meet this machining time requirement? Also calculate the material removal rate for this operation in cubic mm/seconds.
Answers: 2
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
In a production turning operation, an engineer wants a single pass must be completed on the cylindri...
Biology, 23.04.2021 17:20
Chemistry, 23.04.2021 17:20
Biology, 23.04.2021 17:20
Arts, 23.04.2021 17:20
Social Studies, 23.04.2021 17:20
Social Studies, 23.04.2021 17:20
Spanish, 23.04.2021 17:20
Biology, 23.04.2021 17:20
English, 23.04.2021 17:20
Mathematics, 23.04.2021 17:20
Mathematics, 23.04.2021 17:20
Physics, 23.04.2021 17:20