subject
Engineering, 18.07.2020 21:01 Geo777

A brass bolt (Eb = 15 X 10^6 psi) of 3/8 in. diameter is fitted inside a steel tube (Es = 29 X 10^6 psi) of 7/8-in. outer diameter and 1/8 in. wall thickness. After the nut has been fit snugly, it is tightened a one-quarter full turn. Knowing that the bolt is single-threaded with a 0.1-in. pitch, determine the normal stress in: a. The bolt
b. The tube.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
question
Engineering, 04.07.2019 18:20
Wiy doeres rere okhn a pump whon working betwon the same pressure range?
Answers: 2
question
Engineering, 04.07.2019 19:10
The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]
Answers: 3
You know the right answer?
A brass bolt (Eb = 15 X 10^6 psi) of 3/8 in. diameter is fitted inside a steel tube (Es = 29 X 10^6...
Questions
Questions on the website: 13722363