Comparator implementation [20] Submission file for this part: 2.circ
Main circuit name: comparison Input pin(s):
inputa [2], inputb [2]
Output pin(s):
areequal [1],
greaterthan [1],
lessthan [1]
Implement a 2-bit comparator.
While already specified above, you may not use anything from the Arithmetic library for this problem. This defeats the purpose of the problem. You must implement your comparator within the constraints specified for this lab.

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false

Agas mixture with a compostion of 55 methane, 30% propane, and 15 butane by volume) is compressed from 1 bar and 25°c to 9bar in a compressor with an isentropic efficiency of 85%. the environment has a temperature of to25 c. determine (a) the exit temperature of the mixture (b) the specific work required to run the compressor (c) the specific entropy generation of the process (d) the specific exergy destruction of the process (e) the second law efficiency of the compressor