In a diode circuit, where an AC voltage vIN, with a DC offset of 5 V and AC amplitude of 10 mV, is applied to a 1 MΩ resistor and a PN junction diode. Let’s express vIN = VIN + vin, where VIN = 5 V is the DC offset and vin = 10 cos(t + ϕ) mV is the AC component. Since vIN oscillates between 4.99 V (= 5 − 0.01) and 5.01 V (= 5 + 0.01), the diode is always in reverse bias. Required:
Draw the Vout waveform when the diode has 0.7V voltage drop.

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.