A spherical gas-storage tank with an inside diameter of 17 ft is being constructed to store gas under an internal pressure of 273 psi. The tank will be constructed from structural steel that has a yield strength of 41 ksi. If a factor of safety of 2.4 with respect to the yield strength is required, determine the minimum wall thickness required for the spherical tank.

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?