Engineering, 05.08.2020 02:01 jules8022

A Brayton cycle gas engine is analyzed using the cold air standard method. Given the conditions at state 1, pressure ratio (rp), and cutoff ratio (rc) determine the efficiency and other values listed below. The specific heat ratio and gas constant for air are given as k =1.4 and R=0.287 kJ/kg-K respectively. T1 (K) = 337T2 (K) = 647P1 (kPa) = 169rp = 10.3rc = 1.85AV (m3/s) = 1.4Specific Enthalpy at State 1= 337.396Relative pressure at State 1= 2.0849Relative pressure at State 2= 21.5Required:a. Determine the pressure (kPa) at state 2. b. Determine the temperature (K) at state 3.c. Determine the pressure (kPa) at state 3.d. Determine the specific enthalpy (kJ/kg) at state 3.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Have a greater impact on maintenance productivity than any other support group. (clo5) a)-the top management b)-inventory and purchasing c)-sub-contracting d)-cmms

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

Answer

You know the right answer?

A Brayton cycle gas engine is analyzed using the cold air standard method. Given the conditions at s...

Questions