A switch-mode dc-dc converter is operating at a switching frequency of 20 kHz, and Vd 5 150 V. The average current being drawn by the dc motor is 8.0 A. In the equivalent circuit of the dc motor, Ea = 100 V, Ra = 0:25 Ω, and La = 4 mH. (a) Plot the output current and calculate the peak-to-peak ripple, and (b) plot the current on the dc-side of the converter.

Fluids at rest possess no flow energy. a)- true b)- false

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented