Engineering, 12.08.2020 08:01 bbrid8590

Flyback Converters In Problems 8.1 through 8.4, in a Flyback converter, Vin = 30V, N1 = 30 turns, and N2 = 15 turns. The self-inductance of winding. The output voltage is regulated at Vo = 9 V.

1. For the same duty-ratio as in problem 8.1, calculate the critical power which makes this converter operate at the border of incomplete and complete demagnetization modes.

2. Draw the waveforms, similar to those in Problem 8.1, in Problem 8.2.

3. Consider that a Flyback converter is operating in the complete demagnetizing mode. Under this mode of operation, derive the voltage transfer ratio in terms of the transformer magnetizing inductance Lm1 seen from the input-side winding, switching frequency fs the duty-ratio D, and the load resistance R.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

An electric kettle is made out of stainless steel, weighs two pounds (when empty) and is equipped with a heating element that consumes 2 kw of electricity. assuming that the water and the kettle are at the same uniform temperature at any moment of time, calculate the shortest possible time to bring 2 quarts of water from room temperature to the onset of boiling

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates

Answers: 3

Answer

You know the right answer?

Flyback Converters In Problems 8.1 through 8.4, in a Flyback converter, Vin = 30V, N1 = 30 turns, a...

Questions