Engineering, 12.08.2020 08:01 josie311251
A syringe pump is often used to pump small precise volumes of liquids. Imagine you are given a faulty syringe pump to use in the lab. The pump leaks at a rate of 15% whatever the flowrate out of the nozzle Qn. The syringe has a diameter (Ds) of 30 mm, a length of 120 mm and a nozzle diameter (Dn) of 3 mm. For your experiment, a nozzle flowrate of 1 milliliters/s is required. Answer the following questions:
(a) At what rate do you need to program the plunger velocity (Vp) to ensure you achieve the targeted flowrate (in mm/s)?
(b) How long will you be able to maintain this flowrate (in min)?
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
Engineering, 04.07.2019 19:10
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
You know the right answer?
A syringe pump is often used to pump small precise volumes of liquids. Imagine you are given a fault...
Questions
Mathematics, 22.02.2021 17:50
Physics, 22.02.2021 17:50
Computers and Technology, 22.02.2021 17:50
Mathematics, 22.02.2021 17:50
Advanced Placement (AP), 22.02.2021 17:50
Physics, 22.02.2021 17:50
Mathematics, 22.02.2021 17:50
Mathematics, 22.02.2021 17:50
History, 22.02.2021 17:50
Geography, 22.02.2021 17:50
