Engineering, 12.08.2020 22:01 jaeybird9
The variation of the clockwise angular acceleration with the angular displacement of gear A is shown. If the clockwise angular velocity of gear A is 250 rev/min at time = 0. Find the angular velocity of gear B after the gear A rotating 20 revolutions.
Answers: 3
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 19:10
An electric kettle is made out of stainless steel, weighs two pounds (when empty) and is equipped with a heating element that consumes 2 kw of electricity. assuming that the water and the kettle are at the same uniform temperature at any moment of time, calculate the shortest possible time to bring 2 quarts of water from room temperature to the onset of boiling
Answers: 2
Engineering, 04.07.2019 19:20
Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.
Answers: 1
Engineering, 04.07.2019 19:20
Ashielded metal arc-welding operation is accomplished in a work cell by a fitter and a welder. the fitter takes 5.5 min to load components into the welding fixture at the beginning of the work cycle, and 1.5 min to unload the completed weldment at the end of the cycle. the total ength of the weld seams 1200 mm, and the travel speed used by the welder averages 300 mm/min. every 600 mm of seam length, the welding stick must be changed, which takes 0.8 min. while the fitter is working, the welder is idle (resting): and while the welder is working the fitter is idle. (a) determine the average arc-on time as a fraction of the work cycle time. (b) how much improvement in arc-on time would result if the welder used flux-cored arc welding (manually operated), given that the spool of weld wire must be changed every 10 weldments, and it takes the welder 5.0 min to accomplish the change? (c) what are the production rates for these two cases (weldments completed per hour)? attach your work and solutions.
Answers: 1
The variation of the clockwise angular acceleration with the angular displacement of gear A is shown...
Mathematics, 05.05.2020 05:51
Mathematics, 05.05.2020 05:51
Mathematics, 05.05.2020 05:51
Mathematics, 05.05.2020 05:51
History, 05.05.2020 05:51
Social Studies, 05.05.2020 05:51
History, 05.05.2020 05:51
Mathematics, 05.05.2020 05:51
Chemistry, 05.05.2020 05:51
Mathematics, 05.05.2020 05:51
Mathematics, 05.05.2020 05:51