Engineering, 15.08.2020 02:01 kaelycaetano66

A single-threaded 25-mm power screw hasa pitch of 5 mm. The frictional diameter of the collar is 45 mm. The max load onvertical direction of the screw is5kN. The collar has a coefficients of friction of0.06, and he threads hasa coefficients of friction of0.09. Find the overall efficiency and the torque to "raise" and "lower" the load.

Answers: 2

Show answers

Answers

Answer from: iris7324

torque to raise the load = 16.411 Nm

torque to lower the load = 8.40 Nm

overall efficiency = 0.24

Explanation:

Given:

max load on vertical direction of the screw = Force = F = 5kN

frictional diameter of the collar = 45 mm

Diameter = 25 mm

length of pitch = 5 mm

coefficient of friction for thread µ = 0.09

coefficient of friction for collar µ $_{c}$ = 0.06

To find:

torque to "raise" the load

torque to and "lower"

overall efficiency

Solution:

Compute torque to raise the load:

$T_{R} = \frac{ Fd_{m}}{2} (\frac{L+(\pi ud_{m}) }{\pi d_{m}-uL }) +\frac{Fu_{c} d_{c} }{2}$

where

$T_{R}$ is the torque

F is the load

$d_{m}$ is diameter of thread

$d_{c}$ is diameter of collar

L is the thread pitch distance

µ is coefficient of friction for thread

µ $_{c}$ is coefficient of friction for collar

Putting the values in above formula:

$T_{R}$ = 5(25) / 2 [5+ (π(0.09)(25) / π(25)-0.09(5)] + 5(0.06)(45) / 2

= 125/2 [5 + (3.14)(0.09)(25)/ 3.14(25)-0.45] + 13.5/2

= 62.5 [(5 + 7.065) / 78.5 - 0.45] + 6.75

= 62.5 [12.065 / 78.05 ] + 6.75

= 62.5 (0.15458) + 6.75

= 9.66125 + 6.75

= 16.41125

$T_{R}$ = 16.411 Nm

Compute torque to lower the load:

$T_{L} = \frac{ Fd_{m}}{2} (\frac{(\pi ud_{m}) - L }{\pi d_{m}-uL }) +\frac{Fu_{c} d_{c} }{2}$

= 5(25) / 2 [ (π(0.09)(25) - L / π(25)-0.09(5) ] + 5(0.06)(45) / 2

= 125/2 [ ((3.14)(0.09)(25) - 5) / 3.14(25)-0.45 ] + 13.5/2

= 62.5 [ (7.065 - 5) / 78.5 - 0.45 ] + 6.75

= 62.5 [ 2.065 / 78.05 ] + 6.75

= 62.5 (0.026457) + 6.75

= 1.6535625 + 6.75

= 8.40 Nm

Since the torque required to lower the the load is positive indicating that an effort is applied to lower the load, Hence the thread is self locking.

Compute overall efficiency:

overall efficiency = F(L) / 2π $T_{R}$

= 5(5) / 2(3.14)( 16.411)

= 25/ 103.06108

overall efficiency = 0.24

Answer from: Quest

energy can cross the boundaries of a closed system in the form of heat and mass

explanation:

Answer from: Quest

In a fire lane/near a fire hydrantat any curb/ramp for persons with disabilitiesbeside another parked vehicle (double parking)within an intersection

Another question on Engineering

Engineering, 03.07.2019 14:10

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

Answer

Engineering, 04.07.2019 18:20

For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor

Answers: 3

Answer

Engineering, 04.07.2019 19:20

At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2

Answers: 2

Answer

Engineering, 06.07.2019 04:20

Derive the 2-d finite difference equation for a uniform grid for a node: a) at a plane surface with a uniform heat flux b) at an internal corner with convection

Answers: 1

Answer

You know the right answer?

A single-threaded 25-mm power screw hasa pitch of 5 mm. The frictional diameter of the collar is 45...

Questions