subject
Engineering, 25.08.2020 22:01 sallyguzman4263

ACROSS 1. All the skilled actions a person must take to
drive safely
4. To judge where possible points of conflict may
develop
8. A popular passenger vehicle larger than a car
9. As a driver, you have responsibility for
asy duage or injuries you cause
10. A complex system involving people, machines,
and roadways (abbreviation)
11. As a driver, you will use the steering to
help you execute your decisions
14. People who use the HTS for walking, driving
or riding (2 words)
17. To maneuver a vehicle to avoid possible
conflict
18. The organized visual thinking. doing which
helps you drive is the Proces
19. Another word for a collision
DOWN
2. To locate potential hazards in the ongoing
driving scene
3. A red traffic light's message
5. A vehicle that is often used to deliver packages
6. The main cause of most collisions (2 words)
7. Occurs when a vehicle hats another object
8. Made up of driving laws passed by federal and
state legislatures (2 words)
12. A green traffic light's message
13. All drivers are responsible for using
..cfficient driving habits
14. To determine when, where, and how to take
actions to avoid conflicts
16. A large passenger vehicle-
you might ride one
to school


ACROSS

1. All the skilled actions a person must take to
drive safely
4. To judge where possible p

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
question
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
question
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
question
Engineering, 04.07.2019 19:10
Analyze the factors that influence the choice between the following pairs of processes to make the products indicated: i) sand casting versus die casting of an electric-motor housing ii) thread rolling versus machining of a bolt for high-strength application. (co3/c5)
Answers: 3
You know the right answer?
ACROSS 1. All the skilled actions a person must take to
drive safely
4. To judge where...
Questions
question
History, 02.03.2021 20:00
question
Mathematics, 02.03.2021 20:00
question
Mathematics, 02.03.2021 20:00
question
Mathematics, 02.03.2021 20:00
question
Mathematics, 02.03.2021 20:00
Questions on the website: 13722367