subject
Engineering, 26.08.2020 19:01 jason9394

Compute the Fourier transform of each of the following signals:. (a) x[n] = u[n - 2] - u[n - 6] (b) x[n] = (1/2)^-n u[-n - 1] (c) x[n] = (1/3)^|n| u[-n - 2] (d) x[n] = 2^n sin (pi/4 n) u[-n] (e) x[n] = (1/2)^|n| cos (pi/8(n - 1)) (f) x[n] = {n, -3 ≤ n ≤ 3 0, otherwise (g) x[n] = sin (pi/2 n) + cos (n) (h) x[n] = sin(5 pi/3 n) + cos (7 pi/3 n) (i) x[n] = x[n - 6], and x[n] = u [n] = u[n] - u[n]- - 5] for 0 ≤ n ≤ 5 (j) x[n] = (n - 1) (1/3)^|n| (k) x[n] = (sin (pi n/5)/pi n) cos (7 pi/2 n)

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
You know the right answer?
Compute the Fourier transform of each of the following signals:. (a) x[n] = u[n - 2] - u[n - 6] (b)...
Questions
question
Biology, 19.03.2020 18:52
Questions on the website: 13722361