Engineering, 28.08.2020 02:01 arigar
How many potential solutions would be a good number to have for your project problem ?
Answers: 2
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
How many potential solutions would be a good number to have for your project problem ?...
Mathematics, 01.05.2021 14:00
Mathematics, 01.05.2021 14:00
Chemistry, 01.05.2021 14:00
Mathematics, 01.05.2021 14:00
Mathematics, 01.05.2021 14:00
Arts, 01.05.2021 14:00
English, 01.05.2021 14:00
English, 01.05.2021 14:00
Mathematics, 01.05.2021 14:00
English, 01.05.2021 14:00
Chemistry, 01.05.2021 14:00
English, 01.05.2021 14:00
English, 01.05.2021 14:00