Engineering, 08.09.2020 15:01 VamPL
What should be done after reaching the required recovery vacuum on an appliance?A. Immediately disconnect the recycling or recovery equipment, and open the system for service. B. Wait for at least a few minutes to see if the system pressure rises. C. Break the vacuum with nitrogen and open the system for service. D. Pressurize the system with nitrogen and perform a leak check.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:20
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
Engineering, 04.07.2019 18:20
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
Engineering, 04.07.2019 19:10
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
You know the right answer?
What should be done after reaching the required recovery vacuum on an appliance?A. Immediately disco...
Questions
Mathematics, 15.07.2020 01:01
Spanish, 15.07.2020 01:01
Computers and Technology, 15.07.2020 01:01
Chemistry, 15.07.2020 01:01
