Engineering, 20.09.2020 01:01 babygreg2001p97abr
if the number of teeth in the gears 1 and 2 are 60 and 40,the module pitch =3mm, the pressure angle 20o and the addendum=0.318 of circular pitch determine the velocity of sliding when the contact is at the tip of the teeth of gear 2 and the gear 2 rotates at 800rpm
Answers: 1
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Engineering, 04.07.2019 19:10
A)-explain briefly the importance of standards in engineering design. b)- what is patent? c)-explain the relationship between these standards: b.s. and b.s.en d)- in engineering design concepts, types of loads and how they act are important factors. explain.
Answers: 3
if the number of teeth in the gears 1 and 2 are 60 and 40,the module pitch =3mm, the pressure angle...
History, 20.11.2020 18:40
Mathematics, 20.11.2020 18:40
English, 20.11.2020 18:40
Mathematics, 20.11.2020 18:40
Mathematics, 20.11.2020 18:40
Mathematics, 20.11.2020 18:40
Mathematics, 20.11.2020 18:40
Mathematics, 20.11.2020 18:40
Physics, 20.11.2020 18:40
Biology, 20.11.2020 18:40
Social Studies, 20.11.2020 18:40
Mathematics, 20.11.2020 18:40
Arts, 20.11.2020 18:40
Mathematics, 20.11.2020 18:40
History, 20.11.2020 18:40