subject
Engineering, 22.09.2020 19:01 izaguirrelopez3

Consider a network where two store-and-forward packet switches are between System A and System B. Suppose System A sends a 1,024 byte packet to system B. Also suppose the following:Each packet switch takes 4 msec to process a packetA. The propagation speed on all links is 2.5 x 108 m/secB. The transmission speed for all links is 10 MbpsC. The length of the link between A and S1 is 5,000 kmD. The length of the link between S1 and S2 is 10,000 kmE. The length of the link between S2 and B is 3,000 kmF. There are no queuing delays in the packet switches1. What is the delay between System A and the first packet switch? (i. e., what is the time between the first bit of the packet leaving System A and the last bit of the packet arriving at the packet switch?)2. What is the end-to-end delay for the packet (i. e., how long does it take between the first bit of the packet to leave System A and the last bit of the packet to arrive at System B?)

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
question
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
question
Engineering, 04.07.2019 19:20
In the winter, in order to keep the classroom steadily at 68 f before 10 pm, heating with an average rate of 42,000 btu/hr is provided. assume the outdoor temperature maintains at 32°f, determine the electrical power (kw) required to (a) operate a reversible heat pump (b) operate a real heat pump with a cop (7) of 4.5 and (c) operate an electrical-resistance heater.
Answers: 3
You know the right answer?
Consider a network where two store-and-forward packet switches are between System A and System B. Su...
Questions
question
Mathematics, 05.03.2021 23:30
question
History, 05.03.2021 23:30
question
Mathematics, 05.03.2021 23:30
Questions on the website: 13722362