Engineering, 29.09.2020 20:01 autumperry7078

Lydia is the CEO for a large pharmaceutical manufacturer. Her company is in the final stages of FDA approval for a new drug for diabetics. The new drug is expected to bring in billions of dollars for the company. Lydia is acquainted with Bradley,
the CSHO on rotation for OSHA inspections. Lydia is concerned that a surprise inspection may turn up violations, which could affect the launch of
the drug. Lydia reaches out to Bradley and casually mentions that it would be helpful if he could tell her when the next OSHA inspection will be
Should Bradley give Lydia advance notice about an upcoming inspection?
No, because he could receive fines and a jail term.
No, because this situation does not meet the criteria for advance notice.
Yes, because employers may request an OSHA inspection at any time.
Yes, because the inspection will be conducted during regular business hours.

Lydia is the CEO for a large pharmaceutical manufacturer. Her company is in the final stages of FDA

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

You know the right answer?

Lydia is the CEO for a large pharmaceutical manufacturer. Her company is in the final stages of FDA...

Questions