Consider two long, slender rods of the same diameter but different materials. One end of each rod is attached to a base surface maintained at 100 C, while the surfaces of the rods are exposed to ambient air at 20 C. By traversing the length of each rod with a thermocouple, it was observed that the temperatures of the rods were equal at the positions xA 0.15 m and xB 0.075 m, where x is measured from the base surface. If the thermal conductivity of rod A is known to be kA 70 W/m K, determine the value of kB for rod B.

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.