Engineering, 13.10.2020 23:01 alexandroperez13
A line shaft is to transmit 30kW at 160rpm. It is driven by a motor placed directly under it by means of a belt running on a 1m diameter pulley keyed to the end of the shaft. The tension on the tight side of the belt is 2.5 times that on the slack side and the center of the pulley overhangs 150mm beyond the center line of the end bearing. The allowable shear stress is 56MPa and the mass of the pulley is 160kg. Determine the diameter of the shaft.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:20
Have a greater impact on maintenance productivity than any other support group. (clo5) a)-the top management b)-inventory and purchasing c)-sub-contracting d)-cmms
Answers: 2
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
Engineering, 04.07.2019 18:20
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
You know the right answer?
A line shaft is to transmit 30kW at 160rpm. It is driven by a motor placed directly under it by mean...
Questions
Mathematics, 31.01.2020 07:43
Mathematics, 31.01.2020 07:43
Chemistry, 31.01.2020 07:43
History, 31.01.2020 07:43
Mathematics, 31.01.2020 07:43
History, 31.01.2020 07:43
Mathematics, 31.01.2020 07:43
Mathematics, 31.01.2020 07:44
Spanish, 31.01.2020 07:44
