Engineering, 15.10.2020 08:01 BIKRAMlawati9684

A large V8 SI four-stroke cycle engine with displacement of 4.6 liters is equipped with cylinder cutout, which converts the engine to a 2.3 liter V4 when less power is needed. At a speed of 1750 RPM the engine, as a V8, has a volumetric efficiency of 51%, a mechanical efficiency of 75%, an air-fuel ratio of 14.5, and produces 32.4 kW of brake power using gasoline. With cylinder cutout and operating at higher speed as a V4, the engine has a volumetric efficiency of 86%, a mechanical efficiency of 87%, and uses an air-fuel ratio of 18.2. Indicated thermal efficiency can be considered the same at all speeds, and combustion efficiency is 100%. Calculate : a) Mass flow rate of air into V8 engine at 1750 RPM. [kg/sec]
b) Mass flow rate of fuel into V8 engine at 1750 RPM. [kg/sec]
c) The bsfc as V8 at 1750 RPM. [gram/kW-hr]
d) Engine speed needed as a V4 to produce same brake power output. [RPM]
e) The bsfc as V4 at higher speed. [gram/kW-hr]

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when

Answers: 1

Answer

You know the right answer?

A large V8 SI four-stroke cycle engine with displacement of 4.6 liters is equipped with cylinder cut...

Questions