Engineering, 16.10.2020 02:01 georgesarkes12

Directions: Use the Simple Machines – Levers slide show to complete the guided notes. 1. Simples Machines are Mechanisms that manipulate magnitude of and .

2. The six simple machines are the

3. Mechanical Advantage (MA) is the

1.

2.

4. A mechanical advantage of 2:1 tells us what about a mechanism?

Effort force magnitude is times less than the magnitude of the resistance force.

Effort force travels times greater distance than the resistance force.

5. The force applied on an object times distance the object travels parallel to the force is known as .

6
.

Work = x = F · d║
7. If MA is greater than 1:
⦁ Proportionally effort force is required to overcome the resistance force
⦁ Proportionally effort distance is required to overcome the resistance force
If MA is less than 1:
⦁ Proportionally effort force is required to overcome the resistance force
⦁ Proportionally effort distance is required to overcome the resistance force

8. MA be less than or equal to zero.

9. What is the formula for Ideal Mechanical Advantage? Be sure to write down what the variables are.

10. IMA
1. Used in efficiency and safety factor design calculations

2. Theory-based calculation

3.

4.

11. What is the formula for Actual Mechanical Advantage? Be sure to write down what the variables are.

12. AMA
1. Inquiry-based calculation

2. Frictional losses are taken into consideration

3.

4.

13. Complete the table below. Be sure to label the fulcrum, effort, and resistance.
1st class lever 2nd class lever 3rd class lever

14. is the The turning effect of a force about a point equal to the magnitude of the force times the perpendicular distance from the point to the line of action from the force.

15. is the force that produces or tends to produce rotation or torsion.

16. On the diagram to the right label the Distance Resistance (DR), Distance Effort (DE), Effort Force (FE), and Effort Resistance (FR)

17. Calculate the effort moment acting on the lever.

Formula Substitution Answer

18. Calculate the unknown distance (DR) from the fulcrum to the resistance force.

Formula

Substitution Answer

19.In the example above what is the AMA, IMA, and Efficiency?

Formula Substitution Answer
AMA

IMA

Efficiency

20. Why isn’t any machine 100% efficient?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

Answer

Engineering, 04.07.2019 18:20

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

Answers: 3

Answer

You know the right answer?

Directions: Use the Simple Machines – Levers slide show to complete the guided notes. 1. Simples Ma...

Questions