subject
Engineering, 16.10.2020 14:01 rileyeddins1010

An equimolar liquid mixture of benzene and toluene is fed to a distillation column. The vapor leaving the top of the column is 97% benzene. The vapor is completely condensed and split into 2 equal streams – the distillate and the reflux streams (reflux ration = 1). The recovery of benzene in the distillate stream is 89.2%. Some of the liquid leaving the bottom of the tower is recycled back into the tower as a vapor using a partial reboiler. 45% of the liquid stream entering the partial reboiler is vaporized and recycled back to the column. The liquid out of the reboiler is the final liquid product stream. The composition of the liquid/vapor streams leaving the reboiler is given by the following equation:

(ybv)/(1-ybv)/Ybt/(1-Ybt)= 2.25

Where ybv is mole fraction of benzene in vapor and ybl is mole fraction of benzene in liquid.

Required:
a. Sketch the problem.
b. Label all streams
c. Write out the material balance table.
d. Write the general material balance (for each control volume used)
e. Decide which terms stay, and which are zero (for each control volume used)
f. Write out the specific balances for each control volume.
8. Degree of Freedom Analysis- Count the possible number of unknowns, number of knowns, and remaining unknowns.
9. Write down all independent equations you would need to solve for all the variables in the material balance table.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
question
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
question
Engineering, 04.07.2019 18:20
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
question
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
You know the right answer?
An equimolar liquid mixture of benzene and toluene is fed to a distillation column. The vapor leavin...
Questions
question
Mathematics, 01.02.2021 04:20
question
Mathematics, 01.02.2021 04:20
question
Mathematics, 01.02.2021 04:20
question
English, 01.02.2021 04:30
Questions on the website: 13722362