subject
Engineering, 20.10.2020 03:01 nyny679

Select the correct answer. Bruce wants to present to his client an architectural drawing that shows the exact details of the living room, kitchen, bedroom, and stairs in relation to other areas of the house. Which type of architectural drawing should Bruce use?
A.
electrical plan
B.
wall section in a detail drawing
C.
cutting-plane view
D.
plan view in a general plan
E.
section view in a general plan

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
question
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
You know the right answer?
Select the correct answer. Bruce wants to present to his client an architectural drawing that shows...
Questions
question
Mathematics, 15.07.2019 09:00
Questions on the website: 13722360