200-mm lever and a 240-mm-diameter pulley are welded to the axle BE that is supported by bearings at C and D. If a 720-N vertical load is applied at A when the lever is horizontal, determine (a) the tension in the cord, (b) the reactions at C and D. Assume that the bearing at D does not exert any axial thrust.

a) the tension in the cord T is 1200 N

b)

reaction at C along x-axis Cy is 400 N

reaction at C along y-axis Cy is 1200 N

reaction at C along z-axis Cz is 0 N

reaction at D along X-axis Dx is 1600 N

reaction at D along y-axis Dy is -480 N

Explanation:

a)

to find the tension in the cord, we say;

∑ Mz = 0

720(200) - T(120) = 0

144000 - 120T = 0

T = 144000/120

T = 1200 N

the tension in the cord T is 1200 N

b)

the reactions at C and D. Assume that the bearing at D does not exert any axial thrust.

we make use of the moment law of equilibrium at point D about y-axis.

∑ MDy = 0

Cx(120) - T(40) = 0

we substitute value of T

Cx(120) - 1200(40) = 0

Cx 120 = 48000

Cx = 48000/120

Cx = 400 N

reaction at C along x-axis Cy is 400 N

Next we also apply the moment law of equilibrium at point D about x-axis.

∑MD z = 0

-Cy(120) + 720(80 + 120) = 0

-Cy(120) = - 144000

Cy = -144000 / - 120

Cy = 1200 N

reaction at C along y-axis Cy is 1200 N

we also apply the force law of equilibrium along z direction

∑Fz = 0

Cz = 0 N

reaction at C along z-axis Cz is 0 N

we also apply the force law of equilibrium along x direction

∑Fx = 0

Cx + Dx + T = 0

Substitute 400N for Cx and 1200 N for Dx

so

400 + Dx + 1200 = 0

Dx = 1600 N

therefore reaction at D along X-axis Dx is 1600 N

we also apply the force law of equilibrium along y direction

∑ Fy = 0

Cy + Dy - 720 = 0

we substitute Cy = 1200 N

so

1200 + Dy - 720 = 0

Dy = - 480 N

therefore reaction at D along y-axis Dy is -480 N

the warning light flashes for a second or two when the engine starts. if it stays on, there's must be something wrong with the coolant. you should never dare to continue driving when the light is on. pull over as soon as possible and shut the engine off.

hope this is what you're talking about

answer:

the answer is d

explanation: