Engineering, 21.10.2020 16:01 mackenziewright2002
A smokestack emits pollutant A into the air on a sunny day. The effective stack height is 400 m. The wind speed is 4 m/s, due east. Your house is located 5.0 km due east of the smokestack. The ground level concentration of pollutant A is 2.0 mg/m3 at your house. Your friend lives 5.0 km east and 1.0 km south of the smokestack. a. What is the emission rate of the pollutant in kg/s?For the emission rate determined in part a, you now want to know the concentration of pollutant X at ground level at your friend’s house. b. What parameters change in the dispersion modeling equation? For each parameter, include the parameter symbol, a definition of the parameter, and its new quantitative value. c. Is the concentration at your friend’s house lower, the same or higher than the concentration at your house and why?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
You know the right answer?
A smokestack emits pollutant A into the air on a sunny day. The effective stack height is 400 m. The...
Questions
