Engineering, 21.10.2020 16:01 didirose
A 2-ft long split spoon sampler was hammered into the ground using a 140 lb hammer with a drop height of 30 inches for the purpose of the SPT test and sampling. The recorded blow counts per 6 inches from a depth of 10-12 feet were 15-18-11-16. What is the (uncorrected) N-value from this data?
a. 29 blows/ft
b. 60 blows/ft
c. 27 blows/ft
d. 33 blows/ft
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
Engineering, 04.07.2019 19:10
What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?
Answers: 2
Engineering, 04.07.2019 19:10
Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.
Answers: 2
You know the right answer?
A 2-ft long split spoon sampler was hammered into the ground using a 140 lb hammer with a drop heigh...
Questions
Arts, 30.04.2021 19:50
Mathematics, 30.04.2021 19:50
English, 30.04.2021 19:50
Mathematics, 30.04.2021 19:50
Physics, 30.04.2021 19:50
World Languages, 30.04.2021 19:50
