Engineering, 22.10.2020 09:01 saneayahsimmons

Match the scenario with the type of engineer it represents. aerospace engineer
As a child, Christopher dreamed of working with spacecraft
and aircraft. He has studied acoustics, propulsion, and
1.
thermodynamics. He has also worked to improve his writing
skills. He is finally ready to sit for his PE exam.
A space shuttle is being developed. Daniel is one of a team
of engineers tasked with ensuring that the design of the
2. aircraft is safe for this mission. This is an extremely important
role, as entire crews have been lost due to miscalculations at
this phase of the process.
NASA has just released a satellite into space. It is supposed
3. to stay in Earth's orbit but keeps disengaging and floating
away. A team of experts is summoned to find a solution.
aeronautical engineer
astronautical engineer

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

Answer

Engineering, 04.07.2019 19:10

What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?

Answers: 2

Answer

Engineering, 04.07.2019 19:20

At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2

Answers: 2

Answer

You know the right answer?

Match the scenario with the type of engineer it represents. aerospace engineer
As a child, Ch...

Questions