Engineering, 22.10.2020 19:01 Michcardwell1071
PLEASE HELP
What do we call the void or groove left along the edge of the weld bead do to improper welding techniques?
By changing the of the electrode, the arc force can change the weld bead build up.
What is the recommended amperage range for a ⅛” 6010/6011 electrode?
The welder makes what adjustment as they are welding to change the size of weld that they are producing?
Approximately how long does it take to burn a ⅛” 6010 electrode?
The welder uses a higher or lower amperage when welding on thick materials?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
You know the right answer?
PLEASE HELP
What do we call the void or groove left along the edge of the weld bead do to improper...
Questions
Chemistry, 31.01.2020 01:58
Mathematics, 31.01.2020 01:58
Mathematics, 31.01.2020 01:58
Geography, 31.01.2020 01:58
Mathematics, 31.01.2020 01:58
Mathematics, 31.01.2020 01:58
Advanced Placement (AP), 31.01.2020 01:58
History, 31.01.2020 01:58
History, 31.01.2020 01:58
Mathematics, 31.01.2020 01:58
