Engineering, 22.10.2020 19:01 brendamillan05
A parallel helical gearset uses a 20-tooth pinion driving a 36-tooth gear. The pinion has a right hand helix angle of 30-degrees, a normal pressure angle of 25-degrees, and a normal diametral pitch of 6 teeth/in. Find:
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
You know the right answer?
A parallel helical gearset uses a 20-tooth pinion driving a 36-tooth gear. The pinion has a right ha...
Questions
Computers and Technology, 06.03.2020 22:39
Mathematics, 06.03.2020 22:39
Biology, 06.03.2020 22:40
SAT, 06.03.2020 22:40
