subject
Engineering, 22.10.2020 19:01 zee786

A soda lime glass sphere of diameter D1 = 25 mm is encased in a bakelite spherical shell of thickness L = 10 mm. The composite sphere is initially at a uniform temperature, Ti = 40°C, and is exposed to a fluid at T[infinity] = 10°C with h= 30 W/m2 · K. Determine the center temperature of the glass at t = 200 s. Neglect the thermal contact resistance atthe interface between the two materials

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
question
Engineering, 04.07.2019 19:10
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
question
Engineering, 04.07.2019 19:20
Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w
Answers: 2
You know the right answer?
A soda lime glass sphere of diameter D1 = 25 mm is encased in a bakelite spherical shell of thicknes...
Questions
question
Arts, 22.04.2021 19:40
question
History, 22.04.2021 19:40
question
Mathematics, 22.04.2021 19:40
question
Mathematics, 22.04.2021 19:40
question
History, 22.04.2021 19:40
question
Mathematics, 22.04.2021 19:40
question
Mathematics, 22.04.2021 19:40
Questions on the website: 13722367