Engineering, 23.10.2020 03:01 lasvegas5811
You test and adjust your solution. Identify which system you are using—open-loop or closed-loop
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
You know the right answer?
You test and adjust your solution. Identify which system you are using—open-loop or closed-loop...
Questions
Mathematics, 29.09.2021 18:50
Mathematics, 29.09.2021 18:50
Mathematics, 29.09.2021 18:50
Mathematics, 29.09.2021 18:50
Arts, 29.09.2021 18:50
Biology, 29.09.2021 18:50
Mathematics, 29.09.2021 18:50
Mathematics, 29.09.2021 18:50
Advanced Placement (AP), 29.09.2021 18:50
English, 29.09.2021 18:50
History, 29.09.2021 18:50
