subject
Engineering, 27.10.2020 17:20 aidentrooper8629

Steam enters a turbine superheated at 6 MPa and 680 K and exits the turbine at 0.1 MPa with a quality of 0.89. The steam flow rate is 12 kg/s. Determine the power delivered by the turbine.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
question
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
Steam enters a turbine superheated at 6 MPa and 680 K and exits the turbine at 0.1 MPa with a qualit...
Questions
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Chemistry, 18.09.2020 01:01
question
Social Studies, 18.09.2020 01:01
question
Spanish, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Social Studies, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
Questions on the website: 13722362