Engineering, 28.10.2020 22:10 alexmoy45p8yd7v
Which statement best explains why pneumatic cylinders need to be smaller than hydraulic cylinders?
The pneumatic system only needs enough room to have an onloff switch installed in order to operate correctly.
The energy in pneumatic power systems is easily transmitted to gases, which absorb the energy of the system and lower its efficiency
The control of the hydraulic system is much more precise and therefore requires a larger cylinder.
The fluid in a hydraulic system has more mass and therefore needs more storage space.
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
Which statement best explains why pneumatic cylinders need to be smaller than hydraulic cylinders?...
Mathematics, 30.11.2020 22:10
History, 30.11.2020 22:10
Mathematics, 30.11.2020 22:10
English, 30.11.2020 22:10
Biology, 30.11.2020 22:10
Mathematics, 30.11.2020 22:10
Mathematics, 30.11.2020 22:10
History, 30.11.2020 22:10
Biology, 30.11.2020 22:10