subject
Engineering, 30.10.2020 18:10 yesseniaroman21

(a)A three-point transverse bending test is conducted on a cylindrical specimen of aluminum oxide having a reported flexural strength of 300MPa (43,500psi). If the specimen radius is 5.0mm (0.20in.) and the support point separation distance is 15.0mm (0.61in.), would you expect the specimen to fracture when a load of 7500N (1690lbf) is applied? Justify your answer.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
question
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
(a)A three-point transverse bending test is conducted on a cylindrical specimen of aluminum oxide ha...
Questions
question
Business, 04.03.2021 02:50
question
Mathematics, 04.03.2021 02:50
question
Mathematics, 04.03.2021 02:50
Questions on the website: 13722361