subject
Engineering, 02.11.2020 03:00 1lilzomb

Your school’s band decides to sell cookie dough kits to raise money for a spring field trip. There is a Family Times Cookie Dough kit that you can buy for $7 and sell for $12, and a Baker’s Delight kit that you can buy for $15 and sell for $25. The PTA (Parent – Teacher Association) will lend you $2100 to buy supplies. The company selling you the kits informs you that a school your size can expect to sell at most 220 kits. You should decide : How many of each type of kit should your band purchase to raise the most 11. Move your cursor around in the feasible region and note the various x and y values
for various points within the region. Now, identify a point that has integer values for
its x and y coordinates. Evaluate your objective function using these x and y integer
values. Show your work.
12. Find another point in the feasible region with coordinates that are integer
values. Evaluate the objective function with the x and y coordinates of this new point.
Show your work.
13. Compare the result from part 11with result from part 12. Which pair of coordinates
resulted in a greater value when you evaluated the objective function? Continue
searching for a pair of coordinates in the feasible region that would produce a greater
result when they are used to evaluate the objective function than the coordinates used
in part 11 and part 12. What is the greatest value that can be found for the objective
function? What are the coordinates that produce this value?
14. Are you 100% certain that you have found the coordinates that produce the greatest
value for the objective function? Can you be 100% sure? Explain. What do the
results of part 13 mean within the context of your problem?
15. Consider the context of our linear programming model. Why should we only
consider points with coordinates that are whole numbers?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
question
Engineering, 04.07.2019 19:10
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
question
Engineering, 04.07.2019 19:20
Asimple speed reducer is composed of 2 spur gears. the pinion gear has a pitch diameter of 0.75" and 36 teeth while the driven gear has a pitch diameter of 4.0" and 192 teeth. a)-what is the diametral pitch of each gear? b)-if an electric motor rotating ccw at 3000 rpm is coupled to the pinion, what is the rotational speed of the driven gear? c)-if the torque delivered to the pinion is 1 n-m, what is the torque on the driven gear? d)-what is the power transmitted by the gear train?
Answers: 1
You know the right answer?
Your school’s band decides to sell cookie dough kits to raise money for a spring field trip. There i...
Questions
question
Physics, 03.08.2021 14:00
question
Social Studies, 03.08.2021 14:00
question
Mathematics, 03.08.2021 14:00
question
Health, 03.08.2021 14:00
Questions on the website: 13722363