Engineering, 04.11.2020 18:00 reearamrup27
Calculate the forging force for the cylindrical workpiece made of 1020 steel that is 90 mm high and 125 mm in diameter and is reduced in height by 40%. Assuming that it is a complex forging and that the projected area of the flash is 30% greater than the projected area of the forged workpiece.
Answers: 3
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Calculate the forging force for the cylindrical workpiece made of 1020 steel that is 90 mm high and...
Geography, 04.09.2020 14:01
Mathematics, 04.09.2020 14:01
Mathematics, 04.09.2020 14:01
Mathematics, 04.09.2020 14:01
Mathematics, 04.09.2020 14:01
Mathematics, 04.09.2020 14:01
Mathematics, 04.09.2020 14:01
Business, 04.09.2020 14:01
Mathematics, 04.09.2020 14:01
Mathematics, 04.09.2020 14:01
Social Studies, 04.09.2020 14:01
Social Studies, 04.09.2020 14:01
Mathematics, 04.09.2020 14:01