subject
Engineering, 06.11.2020 16:20 jcblake

Please help Design a building that addresses a problem facing a specific region and people in Asia.
Asia is a very large continent with many different types of building needs. In this assignment, you will have the opportunity to outline the design of a building. You will choose where in Asia the building is located and what purpose it will serve. To better understand the needs of the people living at or using your building at your chosen location, you will research both the cultural and environmental conditions facing the society. Based on this research, you will then sketch and describe the main features that your building should possess.

In this assignment, you will do the following:

Choose a location for your building. You may choose any country in Asia, but make sure to specify where in that country your building will be located. For instance, you may wish to name a specific city or town, or specify a region such as the northeast section of the country. If you need help choosing a country, look at the list of Asian countries separated by region listed at the beginning of this lesson.
Research your chosen location. Find at least three references that describe the region and research both the culture of the people and the local environmental conditions.
Based on your research, decide on the type of building that should be built there. Your building should solve a problem that the people face. Perhaps the people need more housing, a school, or a hospital.
Decide on the major design features for the building. Sketch a three-dimensional view of the building and a two-dimensional blueprint of each floor. These drawings do not have to be to scale or labeled with exact dimensions. Make sure that your structure integrates well with the local environment. You may need to conduct more research to understand if the region is prone to natural phenomenon such as seismic activity, monsoons, or extreme cold.
To complete your assignment, write a 500-word essay that answers the following questions in paragraph form:

Where is your building located? Describe the culture of the local people and the environmental conditions of the region.
What problem/need will your building address? Describe the purpose of your building and how it will alleviate this problem.
What is the design of your building? Describe the details of your building, including its approximate size, shape, roof, and number of floors and rooms. Be as specific as possible. You should reference your sketches where appropriate.
What engineering challenges does your structure face? Identify at least two engineering challenges that are specific to the geography of your region. For instance, the area may be prone to flooding or experience frequently seismic activity. How does your design address these issues?
Submit

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
You know the right answer?
Please help Design a building that addresses a problem facing a specific region and people in Asia....
Questions
question
English, 27.12.2019 03:31
Questions on the website: 13722362