Engineering, 07.11.2020 20:00 710jonathan

Read through the paragraph on personal protective equipment on page 2 and fill in the blanks using the list of words below. Each word is used only once. Sewers
Ear defenders
Replaces
Drop
Hazards
Dust mask
Hands
Employer
Safety boots
85db
Protect
Falling objects
Tread
Helmet
Gauntlets
Responsibility
Noise
PPE

I have just started a new job, and it is the responsibility of my to supply the correct PPE for me to wear. PPE is designed to me against workplace . When we go on site I need good strong to protect my feet from things like dampness, in case I something on my foot and also in case I on an up-turned nail. My boss always asks me to use safety gloves to protect my . In fact, once I had to wear arm-length when we were working on some |On site I also have to wear a safety all the time. This is a good thing because it protects my head from any . Working with other trades, such the carpenters, can be hazardous because they make lots of with their power tools. If the noise is above we have to use , otherwise my hearing could be damaged. Because of all the sawdust they create when they are cutting wood, they regularly have to wear a , which stops them breathing in the dust.

I have to look after all the my boss gives me, as it is my . If something gets broken, he it for me as he does not want to get in to trouble with the HSE.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Plan an experiment to measure the surface tension of a liquid similar to water. if necessary, review the ncfmf video surface tension for ideas. which method would be most suitable for use in an undergraduate laboratory? what experimental precision could be expected?

Answers: 2

Answer

You know the right answer?

Read through the paragraph on personal protective equipment on page 2 and fill in the blanks using t...

Questions